Should I Get My Roof Replaced Before Installing Solar Panels in Manor, TX? How Does a Roofing Replacement Work?

More and more homeowners are considering making the big switch from receiving their power from the city the live in or from the sun. There are many people that are making the big switch to solar for their homes. When homeowners decide to go solar, there is often a big question as to whether or not they should have their current roof replaced first. Montgomery Roofing is here to talk about why it may make the most sense to have a roof replaced before you have new solar panels installed.

How Do Solar Panels Work with Roof Replacement?

There are many people that wonder if it is beneficial to have their roof replaced before they have their solar panels installed on their roof. The short answer is yes, putting solar panels on a new roof is what makes the most sense. Here are some of the reasons why.
– The money that you will save on power every month will eventually end up paying for the solar panels as well as the new roof.
– Your current roof has less than 10 years of life left in it. When your roof is older, you don’t want to have solar panels installed only to have then uninstalled 5 years later so that you can have a new roof put on your home.
– You can often have the loan to cover your solar panels and the loan needed to have your roof replaced combined into one payment which can streamline the process.
– When you have both your roof and your solar panels installed at the same time, you can rest easy knowing that you will be able to enjoy both of the products for decades to come. You shouldn’t have to replace your roof for 20-30 years depending on how well you maintain it.
– Consolidating the two projects can simplify the process as far as construction schedules go.

Do I Need to Install a New Roof Before Solar Panels?

The only thing that you need to think about when it comes to your older roof and having solar panels installed is whether or not your current roof can handle the load of solar panels. If you have 20 years of life left in it, you may not want to have it replaced before getting solar. It is important that you enlist the help of a roofing contractor to help you determine whether or not your roof is in good enough condition to handle solar installation.

Roof Inspections, Replacement, Repairs, Maintenance & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

At Montgomery Roofing, we have the knowledge and training needed to tell you honestly whether or not your current roof can handle the load of solar panels on it. If a roof replacement is in order, you can count on us to make sure your new roof is installed right with the strength to support your new solar panels. Call us today!

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

Is it Normal to have Condensation in My Attic in Wells Branch, TX? Roof Leak Repair or Replacement to Fix & More

If you went into your attic recently only to discover that there is condensation inside, then you probably have a problem. It is not good when condensation builds up inside an attic. In the winter the condensation can freeze which is often called attic frost, and in the warm season the tiny water droplets can cling onto the surface material inside the attic. Both dew and frost can cause the attic material such as insulation and roof framing to rot and develop mold. If the wood frame rots or molds it can weaken the framing, which can lead to total roof collapse. Montgomery Roofing will share some of the common causes of attic condensation to help determine the source and repair needs.

Roof Leak

One of the most common causes of condensation in the attic is when water is leaking inside after snow or rain. Leaks can occur from bad flashing around exhaust pipes. Other sources of leaks can come from displaced roof tile or shingles. If pests have chewed a hole through the roof it can also allow additional moisture inside, especially during or after rain or snow. Often you can see the source of the leak after recent rain or snow as you will see where the wood is damp from the water seeping inside.

Poor Ventilation Design

Some homes end up with a poor ventilation system or design where there isn’t enough of or the right size vent to allow proper air flow to help clear out the condensation when it accumulates. Ventilation is essential to the longevity of the roof, especially in high humid areas like Michigan where we average humidity levels between 50 and 80 percent. Condensation is a major problem in the state and it is important that the attic has proper ventilation design. You can have the roof and attic inspected if you have concerns for your roof and attic developing condensation.

Old Exhaust Systems

Older homes may have the bathroom and laundry room exhaust vent feed out of and into the attic. Older homes were built with the exhaust vent popping out through the attic. Contractors hoped the attic ventilation would take care of the rest. This was a major flaw and modern homes have the exhaust vent going straight outside. Older homes that may have this older design could be feeding condensation right inside the attic. Often to correct this problem, the exhaust vent will need to be rerouted. If you are living in an older home be sure that the exhaust vent isn’t fed into the attic where rot and mold could be the result.

Condensation Repair

If you had a major problem with condensation in the attic the damage may already be done. Repairing the damage will vary on how long or severe the damage is. In serious situations if the entire roof structure has been compromised, the entire roof will need to come down and the roof will need to be replaced from the frame out. In most cases, the insulation may need to be replaced and the interior attic treated for mold. It might need to also be dried out with dehumidifiers. If you discover you had condensation in your attic, have your attic inspected immediately to ensure your household safety.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

If you need your roof inspected, repaired and/or replaced, contact Montgomery Roofing and schedule our services today.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

What Type of Roofing is Best for a Flat Roof in Manor, TX? Built Up, Modified Bitumen, EPDM, PVC & More

When it come to residential or commercial buildings there are multiple flat roofing options to choose from. Each has its own unique look as well as its pros and cons. Finding the right flat top roof style depends on your personal preferences and your living environment. Montgomery Roofing offer a helpful guide below.

Built Up Roof (BUR)

The build-up roofing system is one of the most common types of flat roofs. It is relatively inexpensive, and with a finishing cover of river rock, it has the most pleasing look. The build-up roof is created by using three or more plies of waterproof material and hot tar to layer the river rock. Using so many layers help improve the interior’s insulation. Many homes and business favor this method not only for its looks and cost effectiveness, but also as a way to fire proof the roof. Due to the method in which the build-up roof is created; you will need to have plenty of support because of the weight. You may need to reinforce joists, which adds to cost and labor. Some also don’t like the smell of the tar used during installation. However, the smell is a temporary setback and will dissipate over time.

Modified Bitumen Roof

The modified bitumen flat roof uses a similar material such as asphalt but with added polymers to give the roof more protection and to give it a longer life span. Since this is the only material used, installers roll it across the roof using a blow torch to melt and bond the sheets to the roof. Some find the modified bitumen dangerous to install and will avoid it due to accidental fires in the past. New methods have been devolved to minimize any fire that may happen in the future. The modified bitumen does have it advantages. The material used has a reflective surface that can reduce heat inside the building making your summer bill lower. The modified bitumen roof is quick to install and will seal any existing roof leaks.

PVC Roofing Material

Businesses and home owners like the PVC roofs due to the material’s durability and resistance to water for those highly saturated climates. The roof is highly reflective, and is quick to install. Some find the biggest problem with using PVC is the roofs coating. PVC coating is applied in rolls where the seams are glued together. Over time rain can split the seams and cause leaks. Seams can be repaired by taping and gluing them back together. PVC is inexpensive and can last from 10 to 15 years.

EPDM Flat Roofs

Ethylene Propylene Diene Monomer or the EPDM roof is a synthetic rubber that is designed to be resistant to sun damage. This type of roof is very durable and has a long life expectancy. The rubber is used from recycled material making it an environmental benefit. The EPDM roof is applied just like the PVC roofs. Rolls of rubber sheets are spread cross the roof and sealed at the seams. Again, over time seams can leak and will need repair. EPDM is a more recently developed roof system for flat roofs and not yet as common as other methods. However, it is starting to become more used throughout America.

Sprayed on Roof Coating

Most professionals believe that the sprayed on roof coating is the best method for flat roof tops. The silicone roof coating is seamless, resistive to sun and water damage, and reflects sun which helps cool the structure’s interior and keep utility bills down. If the roof is in good condition the application can be quickly done. When the silicone is first applied it has a clean slick look. However the silicone can remain sticky for some time. Wind can bring in dirt and leaves which will get stuck in the silicone. You can use a high pressure hose to remove the debris that affects the overall look of your roof.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

All flat roof options have their own unique benefits. Montgomery Roofing wants to assist you in finding the right style flat roof that fits the desired look of your home or business, as well as your budget and economical needs. Call us today!

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

How Do Storms Damage Roofs? How Do I Protect My Roofing System from High Winds & Rain in Taylor, TX?

The roof of your home is something that is not thought about very much. Most people couldn’t tell you when there is a problem until it becomes a big enough problem that they have a stain on the ceiling or a puddle dripping down onto the floor. Most types of roofs that are installed correctly should stand up to many different types of weather and should last for a long time. There are occasions when a small area or shingle can lift or become damaged and may require some repair work. One of the factors that is most detrimental to a roof is when you mix rain with wind. If rain is falling down it will hit the roof and flow off into a gutter and out the spout with the pitch of the roof. The roofs of many homes are made to allow any type of debris and rain to run off and flow down. This will keep things from piling up and causing unwanted pressure in specific areas and can lead to a roof caving in. But this system is not fail proof. Montgomery Roofing delve more into this topic below.

How Does Wind & Rain Damage a Roof?

When rain and high wind are mixed that can spell disaster to all types of roofs. The wind can push the rain across and under the individual roof pieces that can lead to seeping into the barrier under the tile or shingles. This can then lead to you noticing that there is a small stain appearing somewhere on the ceiling in your home. This is the first sign that you may have a leak, but it is most likely not the first time there has been water leaking into your home. Once the water has penetrated the roof it will begin to accumulate in the same area which means that it can possibly stay moist for a long time. What comes next can be mold and mildew that can build up which has been known to cause health concerns and make many people sick. Now not only do you have an ugly stain on the ceiling, but you have the possibility that there is a place for mold to begin to grow.

Storm Damage Roof Inspection, Emergency Roof Repairs & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

After you recognize that your roof have been compromised by rain and wind you will want to contact a roofing professional like Mike’s Roofing and have them inspect the roof for storm damage and decide the best way to repair any areas that need to be fixed. Montgomery Roofing can even do an inspection before you notice any problem after a large storm to make sure that the next one doesn’t make its way into your home. Call us for all your roofing needs.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!