How Do You Secure Holiday Light Decorations to the Roof in Taylor, TX Without Damaging Roofing System?

It is time for the holiday spirit to enter in, around, on the roof of our homes. We often decorate the outside of our home with all kinds of displays. If you are a holiday enthusiast that adorns your home with light and figures on your roof, Montgomery Roofing would like to share some safety tips while you decorate your home this holiday season. Following are 10 safety tips to promote our customers proper safety while they climb all over their roofs installing their elaborate holiday displays.

How Can I Safely Decorate My Roof for Christmas

1. Always work on your holiday display during the day. It is much safer to walk around your roof with good light so you don’t misstep and get hurt.
2. Before you begin, check the day’s weather conditions. Rain or wind can make it dangerous for you to climb up a ladder and walk around your roof as well. The chances of you slipping and falling are greatly increased during wet weather conditions.
3. Never work on your roof alone. In the event an accident occurs, you don’t want to be left stranded. Especially in the event you are injured.
4. Make sure your ladder is secured and on level ground. If you’re going up and down a ladder, you don’t want to have your ladder slipping or falling on you.
Now let’s protect your roof from damages and/or fire occurring.
5. Check any unwrapped decorations before you get started. Don’t get tangled up as you bring your decorations up to your roof.
6. Make sure you are using outdoor lights. There is a difference between indoor and outdoor lights. The main difference is proper safety and coating that covers the lights that protect the light from the outside elements. Improper lights can cause erosions and electrical fires.
7. Next check your lights and other electrical wire like extension cords and lights for exposed wires and damaged sockets. This too can cause electrical fires that can consume your roof in a very little amount of time.
8. You may want to consider using a timer for your lights and other decorations that require power. This will help prevent accidents while you’re away or sleeping and in the event you forget to turn it off yourself.
9. You don’t want to keep climbing up on your roof if you can help it. Make sure all lights and decorations are secured down properly.
10. Don’t overload outlets or extension cords. All too often this creates a blow out. This too causes electrical fires on your roof.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

You must first consider your personal safety while working on the roof. If you notice any loose tile or missing shingle on your roof, avoid walking on them until properly repaired. Always walk slowly on your roof. Try to place your footing on the seam of two tiles in the center. This will help avoid loose tiles that could slip underneath your feet. After you have considered your safety, then think about your roof and prevent possible electrical fires. The last thing you want during a holiday season is to have the memory of losing your home to an electrical fire. Montgomery Roofing hopes we can make your holiday decorating safe. If you have encountered any damages or see anything that needs repair, contact us right away.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

How Do I Stop My Roof Leaking in the Winter in Brushy Creek, TX; Roofing Inspection, Repairs & More

When the fall and winter season starts to set in the weather is going to change. Over the season you may end up with snow and rain that can end up being the moment you realize you have a roof leak. A roof leak is a serious problem and you really want to prevent it from happening. A roof leak can lead to mold and mildew which can be dangerous to your health and your family’s health too. If the roof is leaking it can even go undetected for some time and the damage can continue to be a problem which can get worse and worse. When you want to prevent a leak on your roof you can have some maintenance done. Montgomery Roofing lists what to have checked during roof maintenance to prevent roof leaks.

Fix Hole in Roof

Obviously the roof is going to have a leak if there is something that has penetrated the roofing materials. There are some major areas that need to be checked when your roof is inspected to check for any penetration. One area that often has this problem is around the chimney in the roof. Others areas are skylights and vents where flashing or lining is installed on the roof and around the fixture itself. The nails and other materials that are used can penetrate through the roof and cause a leak easily.

Inspect Roofing Transitions

When you are having the roof inspected and checked for a leak you want to be sure that the transition areas are checked carefully. The main areas of the transitions are between levels where the roof will lower or get higher. These areas should have a piece of flashing or the transition should be smooth enough so that the flow or water or snow is not stopped. The materials are installed to ensure that whatever is landing in the roof is pushed off by gravity. When the transitions are not done right they can cause a backup and that can end up being a leak.

Check in the Attic

You may think that checking your roof ends outside on a ladder but if that is the end you are missing an huge area. You need to be sure that the inside the roof that usually is the attic is also checked very carefully. The attic is a great area to see a small area that is potentially leaking. It is also a great way to find where the leak is staring from so that you can determine what needs to be done to make the repairs.

Address Clogged or Damaged Gutters

You may think that the gutters are not part of the roof but the best person to repair and install gutters is a roofing contractor. The reason is because the gutters system is installed on the side of the home at the level of the roof and that is why it can potentially cause trouble with your roof. If a part of the gutter is damaged it could have also caused damage to roof that will need to be repaired as well.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

Call Montgomery Roofing for a roof inspection and repairs as needed now to avoid escalating problems this upcoming cold winter season.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

Roof Facts in Buda, TX; Why it is Not OK to Lay a Second Layer of Roofing Shingles Over the Old & More

Despite being one of the biggest and most necessary elements of your home, roofs are often the most neglected. Only after the roof starts to leak do homeowners recall the importance of maintenance, repair, and care. Like most subjects in life, there are myths surrounding the various aspects of your roof. We at Montgomery Roofing would like to relate a handful of the most common myths and dispel them.

Are Gutters Part of a Roof or Separate?

Roofing and gutters, though gutters are an accessory of sorts, go hand-in-hand with your roof and are equally important. To ensure the water is properly diverted from the structures, the gutters are a finishing touch. As they are often included in a new roof installation, as well as the down spot, gutters help prevent the exterior walls from over saturation. Maintenance for gutters and down spout is crucial. Make certain leaves, sticks, dirt, mud, moisture, and wildlife nests among the other debris is periodically cleared out and routinely inspect for any signs of damage.

Is it OK to Lay a Second Layer of Roofing Shingles Over the Old?

Removing the old shingles is essential for a number of reasons, though building code suggests otherwise. You can see signs of damage after removing the old shingles and exposing the raw roof. You can restore the roof after removing the shingles if you discover deterioration, wood rot, leaks, inadequate ventilation, or even mold. Should you need to replace any damaged shingles, always take the time remove the old ones before installing new shingles.

Can You have Too Much Attic Insulation?

Many turns to the attic’s insulation in an effort conserve energy and enhance the performance of the roof. However, too much insulation can be just as detrimental as not enough. Over insulating can obstruct ventilation openings at the soffits and eave in addition to moisture containment, among other issues. When the moisture is confined, the sheathing found in the interior of attics can rot, warp, and even lead to a mold outbreak. If you are unsure about your attic’s insulation mass, call in a professional for guidance.

Are All Asphalt Roof Shingles the Same

There are quite a few options when it comes to roofing materials. You need to consider the shingle designed and pre-treatments as they are specific to the climate conditions and other problems in the area. Different materials, designs, pretreated differently to meet the needs of the environment and homeowner’s tastes.

Do You Only Need to Replace the Flashing when the Roof Needs Replacing?

Installed on rooftops around the chimneys, pipes, vents and other rooftop openings, is flashing, often engineered from metal material. Both sturdy and durable, flashing often outlasts the other roofing components. Despite the longevity, it can fall short within a few months of installation under the right circumstances. As a part maintenance, every 6 months the flashing should be inspected. When you inspect the flashing, look for dried-out caulk or sealant, flawed or damaged flashing segments, and look for any shingles in contact with the flashing. Call a professional for repairs if you discover any of these.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

Montgomery Roofing is readily available for maintenancerepairsinstallation, and inspections for your Texas roof.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

What to Expect When Replacing a Roof in San Marcos, TX? How to Prepare for Roofing Tear Off & New Installation

There comes a time in every home’s life where it will need its roof replaced. When a homeowner discovers that the roof needs to be replaced, they often have a number of questions regarding how roof replacement is done and if they can remain home. They also wonder how long it can take as well as many other questions. Montgomery Roofing will share what you can expect during a roof replacement and hopefully answer your many questions about roof replacement.

How Do I Prepare My Roof for Replacement?

When a roof needs to be replaced there is a lot of preparation that goes into the job to ensure the project goes smoothly. Many roofing contractors will have a large trash receptacle ordered and will need it dropped off close to the house. A number of materials will need to be removed and replaced, and the old material disposed of. Additionally, the homeowner will want to clear the driveway and make sure there are no vehicles, pets or breakable items near the job site.

Roof Tear Off

Once the roofing contractor has prepared the site, they will begin removing the old roofing material. During the removal, the roofing contractor is usually okay with the household remaining home. However, they usually ask that kids and pets remain indoors as they could get hurt during the removal process. The existing roof and its condition will determine how much material will be removed. At times, the entire roof and framing needs to be removed and replaced. Other times just the surface material needs replacing and not the entire roofing structure. During removal, the interior part of the home will remained covered. Because of this there is usually no need to leave the home. However, if the roof is in serious decay and is threatening to collapse then the home isn’t safe.

Replace Flashing & Underlayment

During removal the old flashing is removed and replaced with new flashing. The flashing is the galvanized or aluminum steel that is installed at the grooves or indents on the roof to safely redirect water and to prevent water damage on the roof. A roofing contractor will take their time when installing the roof’s underlayment as it help to protect the roofing structure. The underlayment is designed to catch the water that may drip underneath the roofing tile or shingles.

New Roof Installation

Once the flashing and underlayment has been put in place, the rest of the roof can now be installed. Depending on the type of roof chosen, the time and installation techniques will vary. Most shingle roofs are glued and nail down, while tile roofs are screwed or nailed down. During this phase, installation can get a little noisy and many house members choose to spend time with friends or family. However, replacing a roof can be completed rather quickly. Of course, the size of the home and the repair or replacement needs can determine how long. The roofing contractor can usually give a pretty good estimate of how long the roof replacement will take.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

If you have more questions, concerns, or require your home’s roof to be replacedcontact Montgomery Roofing today.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!