What to Look for When Choosing a Roofing Contractor in Cedar Park, TX; Quote, References & More

When you have made the decision that it is time for a new roof or at least to have your roof repaired there are several things to consider. A new roof or a roof repair should not be taken likely and you want to do your homework when choosing how the work will be done. The first thing is to decide if you will do the work on your own. Roofing is a skill that is taught and should only be done by an experienced roofer. The roof is the cover of your home and that is what keeps you safe from the elements. If you don’t have the roof repaired of replaced correctly it can lead to damage to your home from work and also from weather such as rain, snow and wind. The best thing to do is to hire a professional roofer to do the work for you. Montgomery Roofing lists what to consider when hiring a professional to repair or replace your roof.

What Should I Look for in a Roofing Quote?

When you are ready to have a new roof installed or you just want to have your roof replaced you need to know what the cost will be. When you look at the roofers you are considering you need to know what they are going to charge you. They call that a bid. The bid is a price and should consider a breakdown of the cost so that you can see what you are really paying for. When you see the bid your first reaction may be to just go with the one that is the lowest. That is not always the best option and you really need to see what it is that you are getting for that cost. When you pay a little more you could be getting a better deal and that can lead to the repair or replacement to last longer.

What Qualities Should a Roofer Have?

When you are looking at a roofer to make the repairs or replacement you want to know who you are hiring? You can look into the roofer and the company so that you are confident in the experience and work they are going to offer. There are some ways you can look at the roofer to help determine what kind of company you are working with. Start with their contact information. Do you have access to their phone number, website or email to get a hold of a member of the company? If you are not able to get a hold of them and there is a problem it can be difficult to work out with them. You can also look them up in the internet and see what kinds of reviews they have or social media accounts they have. People are on their phones and computers more often so you may find other people that have used their services and how they felt about the outcome.

Is it Normal to Ask Roofing Contractor for References?

You can also ask the company that you are considering if they have any references or recommendations that they can offer you . You will be able to contact these references and see what they thought about the work and the roofing contractor.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

Montgomery Roofing can expertly meet all your roofing needs. Call us for a roofing consultation and inspection today!

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

What is the Minimum Roof Slope for Asphalt Shingles in Kyle, TX? Rise Over Run Ratio & More

When you need to replace your home’s roof, many homeowners look at an asphalt shingled roof versus a tile roof. Asphalt shingled roofs are widely used in America and are one of the more affordable options for many homeowners. However, when replacing a roof there are some restrictions to the asphalt shingled roof and that is mainly the current slope of the roof. Montgomery Roofing will explain the slope restrictions and regulations for asphalt shingled roofs.

A Roof Slope is the Rise-Over-Run Ratio

If the roof slope rises 4 inches and the bottom of the horizontal run measures at 12 inches, then this slope is a 4:12. The roof’s slope is either measured using a smartphone application or the old fashioned way with a regular tape measure. A roofing contractor will provide a pitch estimator card that measures and documents the roof slope. The pitch estimator provides an accurate measurement of the roof’s slope. Most roofing contractors prefer a 4:12 slope for asphalt shingles. However, the minimum slope requirement for an asphalt shingled roof is a 2:12, which is a 2 inch rise from a 12 inch horizontal run. Most home roofs are designed with a roof slope between 4:12 and 8:12. The slope is often determined by the type of roof that is going on top of the home. When installing an asphalt shingled roof, the slope requirements must be between 2:12 and 4:12. A 2:12 through 4:12 is a rather low sloped roof. One major flaw for low slopes is that water and snow may linger longer than with a shallow slope. If the slope was any lower, the water would stand too long and lead to a number of roof damages and leaks. To steep of a slope can make asphalt shingles dangerous and can compromise the roof’s integrity. When installing asphalt shingles, quality is essential. The shingles must be installed air tight to prevent water from leaking. Additionally, having an asphalt singled roof maintained is also important. Since asphalt shingles are installed on lower sloped roofs there are a number of problems which must be monitored. When shingles become loose or go missing they must be replaced. Asphalt shingles are coated with granules. In time, the granules will fall off and leave the sandy granules in gutters and at the edges of the roof. When the granules wear off they no longer can properly protect the roof. When too much of the granules wears off, it time to replace the shingles.

Replacing a Roof

Asphalt shingled roofs can be installed or they can replace tile roofs if the roof slope meets proper requirements. However, it is essential to maintain the shingles to ensure that the internal roofing structure is properly protected. Once water damage occurs within the roof’s inner structure, it can weaken and lead to leaks and even roof collapse.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

If you need to replace your home’s roof and are considering replacing it with an asphalt shingled roof, contact Montgomery Roofing. We provide quality roofing services and can help repair, install and inspect your roof. Contact us to schedule our services today.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

Frequently Asked Questions: Roof Slope for Asphalt Shingles

What is the minimum roof slope for asphalt shingles?

The minimum roof slope for asphalt shingles is 2:12, meaning the roof rises 2 inches for every 12 inches of horizontal run. Most roofing contractors prefer a 4:12 slope for asphalt shingles, and low-slope installations between 2:12 and 4:12 must be installed airtight to prevent leaks.

What does a 4:12 roof slope mean?

A 4:12 roof slope means the roof rises 4 inches for every 12 inches of horizontal run. This rise-over-run ratio is the standard way roofers measure and describe roof pitch.

What is the best roof slope for asphalt shingles?

The best roof slope for asphalt shingles is generally between 4:12 and 8:12. Most homes are designed within this range because it sheds water efficiently while keeping installation safe and the roof structurally sound.

Can you put asphalt shingles on a low-slope roof?

Yes, asphalt shingles can be installed on low-slope roofs down to 2:12, but they must be installed airtight with proper underlayment. On slopes below 2:12, water stands too long and leads to leaks and roof damage, so a different roofing system is recommended.

How do you measure roof slope?

Roof slope is measured as a rise-over-run ratio using a tape measure, a smartphone app, or a pitch estimator card. You measure how many inches the roof rises over a 12-inch horizontal run.

Roof Facts in Buda, TX; Why it is Not OK to Lay a Second Layer of Roofing Shingles Over the Old & More

Despite being one of the biggest and most necessary elements of your home, roofs are often the most neglected. Only after the roof starts to leak do homeowners recall the importance of maintenance, repair, and care. Like most subjects in life, there are myths surrounding the various aspects of your roof. We at Montgomery Roofing would like to relate a handful of the most common myths and dispel them.

Are Gutters Part of a Roof or Separate?

Roofing and gutters, though gutters are an accessory of sorts, go hand-in-hand with your roof and are equally important. To ensure the water is properly diverted from the structures, the gutters are a finishing touch. As they are often included in a new roof installation, as well as the down spot, gutters help prevent the exterior walls from over saturation. Maintenance for gutters and down spout is crucial. Make certain leaves, sticks, dirt, mud, moisture, and wildlife nests among the other debris is periodically cleared out and routinely inspect for any signs of damage.

Is it OK to Lay a Second Layer of Roofing Shingles Over the Old?

Removing the old shingles is essential for a number of reasons, though building code suggests otherwise. You can see signs of damage after removing the old shingles and exposing the raw roof. You can restore the roof after removing the shingles if you discover deterioration, wood rot, leaks, inadequate ventilation, or even mold. Should you need to replace any damaged shingles, always take the time remove the old ones before installing new shingles.

Can You have Too Much Attic Insulation?

Many turns to the attic’s insulation in an effort conserve energy and enhance the performance of the roof. However, too much insulation can be just as detrimental as not enough. Over insulating can obstruct ventilation openings at the soffits and eave in addition to moisture containment, among other issues. When the moisture is confined, the sheathing found in the interior of attics can rot, warp, and even lead to a mold outbreak. If you are unsure about your attic’s insulation mass, call in a professional for guidance.

Are All Asphalt Roof Shingles the Same

There are quite a few options when it comes to roofing materials. You need to consider the shingle designed and pre-treatments as they are specific to the climate conditions and other problems in the area. Different materials, designs, pretreated differently to meet the needs of the environment and homeowner’s tastes.

Do You Only Need to Replace the Flashing when the Roof Needs Replacing?

Installed on rooftops around the chimneys, pipes, vents and other rooftop openings, is flashing, often engineered from metal material. Both sturdy and durable, flashing often outlasts the other roofing components. Despite the longevity, it can fall short within a few months of installation under the right circumstances. As a part maintenance, every 6 months the flashing should be inspected. When you inspect the flashing, look for dried-out caulk or sealant, flawed or damaged flashing segments, and look for any shingles in contact with the flashing. Call a professional for repairs if you discover any of these.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

Montgomery Roofing is readily available for maintenance, repairs, installation, and inspections for your Texas roof.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!

What to Expect When Replacing a Roof in San Marcos, TX? How to Prepare for Roofing Tear Off & New Installation

There comes a time in every home’s life where it will need its roof replaced. When a homeowner discovers that the roof needs to be replaced, they often have a number of questions regarding how roof replacement is done and if they can remain home. They also wonder how long it can take as well as many other questions. Montgomery Roofing will share what you can expect during a roof replacement and hopefully answer your many questions about roof replacement.

How Do I Prepare My Roof for Replacement?

When a roof needs to be replaced there is a lot of preparation that goes into the job to ensure the project goes smoothly. Many roofing contractors will have a large trash receptacle ordered and will need it dropped off close to the house. A number of materials will need to be removed and replaced, and the old material disposed of. Additionally, the homeowner will want to clear the driveway and make sure there are no vehicles, pets or breakable items near the job site.

Roof Tear Off

Once the roofing contractor has prepared the site, they will begin removing the old roofing material. During the removal, the roofing contractor is usually okay with the household remaining home. However, they usually ask that kids and pets remain indoors as they could get hurt during the removal process. The existing roof and its condition will determine how much material will be removed. At times, the entire roof and framing needs to be removed and replaced. Other times just the surface material needs replacing and not the entire roofing structure. During removal, the interior part of the home will remained covered. Because of this there is usually no need to leave the home. However, if the roof is in serious decay and is threatening to collapse then the home isn’t safe.

Replace Flashing & Underlayment

During removal the old flashing is removed and replaced with new flashing. The flashing is the galvanized or aluminum steel that is installed at the grooves or indents on the roof to safely redirect water and to prevent water damage on the roof. A roofing contractor will take their time when installing the roof’s underlayment as it help to protect the roofing structure. The underlayment is designed to catch the water that may drip underneath the roofing tile or shingles.

New Roof Installation

Once the flashing and underlayment has been put in place, the rest of the roof can now be installed. Depending on the type of roof chosen, the time and installation techniques will vary. Most shingle roofs are glued and nail down, while tile roofs are screwed or nailed down. During this phase, installation can get a little noisy and many house members choose to spend time with friends or family. However, replacing a roof can be completed rather quickly. Of course, the size of the home and the repair or replacement needs can determine how long. The roofing contractor can usually give a pretty good estimate of how long the roof replacement will take.

Roof Installation, Replacement & More in Hillsboro, Mexia, Belton, Killeen, Temple, Harker Heights, Copperas Cove, Austin, Pflugerville, Round Rock, Georgetown, Leander, Cedar Park, Kyle, San Marcos & Greater Waco, TX

If you have more questions, concerns, or require your home’s roof to be replaced, contact Montgomery Roofing today.

Roofing Repair & Installation Contractors Proudly Serving McLennan, Bosque, Hill, Limestone, Bell, Falls, Coryell, Travis, Williamson & Hays County, Texas since 1995!